skip to Main Content

How to install a new toilet according to plumbing experts

To install a new toilet always comes good advice from hamilton plumbing experts if you consider that one of the most popular ways to add value and comfort to current homes is to remodel the bathroom. Bathroom remodeling projects almost always include removing the old toilet to install a new toilet, which can become a dirty and frustrating task. Follow these expert tips to install a new toilet flawlessly. Remove the old toilet One of the expert tips for installing a new toilet is that before installing the toilet, shut off the water supply to the tank with the wall shut-off valve. Do not remove the feed tube yet, otherwise the water in the tank will wet the floor. Discharge the toilet by holding the lever down until as much water as possible has been drained. Then lift the top of the tank and use a sponge to remove the remaining water. Use a sponge and container to remove the remaining water from the bowl. Unscrew the supply tubing from the seal, placing a small towel underneath to absorb the water. Since you will be discarding this tubing, you can use adjusting pliers to close the circuit. Remove the bolt covers from the toilet base to expose the mounting bolt nuts. If they are rusty and difficult to remove, use a metal saw or cut-off wheel plumbing. When removing the toilet, the gasket gasket will be dirty, so protect the floor by covering it with plastic or protective sheeting. If the toilet is attached to the floor with caulk, swing it slowly to break the toilet seal. Lift the tank and toilet carefully and place them on top of the plastic or take them out of the building. Plug the exposed drain hole to prevent gases from escaping into the room. Be sure to use a cloth or other material that cannot fall into the drain pipe. Use a putty spatula to remove any old wax seal that may remain on the mounting flange. Also, clean any remaining caulk from the floor plumber. Install New Toilet Another expert tip for installing a new toilet is to thoroughly clean the area and make sure the mounting surface is level before installing the new toilet. If the tank hasn't been attached to the bowl yet, it will be easier to fit the toilet. Reverse the bowl (place a padded protection on the floor to protect the floor and the edge of the toilet bowl) and press the wax ring into place with the plastic sleeve away from the toilet. The sleeve goes into the mounting flange and drain pipe as hamilton plumbers do. Insert the mounting bolts into the mounting flange using putty to keep them upright and properly aligned. Remove the drain hole plug and carefully lower the bowl over the bolts. Push the toilet bowl down firmly and evenly to compress the wax ring. Never swing the toilet to compress the wax ring as this can cause leaks and uneven compression. Place the plastic retaining washers over the bolts, followed by the flat washers. Tighten the nuts by hand. Then, using a hex wrench, tighten the nuts twice on one side and twice on the other. Continue until the nuts are secure but do not overtighten or the toilet base could break. While securing the toilet, continue to check that the toilet is level. Another expert advice for installing a new toilet is that the toilet should sit snugly on the floor. If it doesn't, make up for the base with traces of lead flashing, available from roofing supply stores. Loosen the nuts slightly and push the compensating material in until the bowl of the toilet seats securely. Trim bolt stops if they protrude too far; they may need to be cut with a metal saw or cutting disc. Press decorative covers over bolts. Install the tank according to Hamilton Plumber Place the rubber gasket gasket between the tank and bowl, place the rubber washers under the heads of the mounting bolts and place the tank over the toilet. Tighten the bolts, alternating from side to side until the tank is secured. Use a leveler to make sure the toilet is level. With the tank already installed, connect the new feed tube to the shut-off valve. Use the correct size wrench to avoid damaging new fittings. Open the valve and check for leaks. Discharge the toilet and recheck for leaks and proper operation. Put silicone caulk on the floor of the toilet base. Install toilet seat as the hamilton plumber advices. Tools and Materials You'll Need to Install a New Toilet
  • Adjustable wrench or set of wrenches
  • Leveler
  • Metal Saw
  • Putty spatula
  • Bowl Wax Ring
  • Toilet retention bolts
  • Plastic bolt covers
  • Silicone gun and putty for kitchens and bathrooms
  • Plastic or protective sheeting
  • Padding to protect the new toilet
  • Sponges and rags
Read More

Different exterior Stucco ideas – What else can you ask for?

Stucco is one of the most versatile means of finishing. Since the 1960’s stucco has been used to make building more durable, low cost and less prone to damage. As stucco continues to grow much more popular, it has even become more flexible as unlike the traditional stucco you can use in various ways and produce even better finish for your structure. You can search for exterior stucco contractors near me to rebrand your home or give it a unique finish if you are building a new home. Edmonton residential stucco is becoming very popular as time goes by and many people are making use of it. There are many people who have made use of it and that make it a very preferred option. There are different ways and ideas in which snap stucco: Exterior stucco Edmonton contractor & Repair can improve to give your home a unique and durable look. First, to ensure that your wall or structure is coated for durability, the coating is done in three layers. This is to ensure that all cracks and small openings are carefully filled up and evened out to ensure that the final coating results in a very smooth finish. Many people are worried about the quality of the product and that helps one to get the process done easily. Stucco is a very good and long lasting plaster. It is used for making the false ceiling, building decorative walls and also it looks very different and attractive. Stucco plastering is getting a wide response for construction and projects in the modern world. Stucco is somewhat which can change look for your walls completely its good architecture. It is never easy to get highs done for home. You need a good agency which can do the job in quick time. You need something that is really good and weather-resistant. There are many good modern day construction projects which can give good results. It is really very important to safeguard the walls and that can happen with the help of architectural structure. Keep in mind, that the decoration also should be done in the right way, this is something very important. If you want some good edmonton residential stucco service then you need to just research and once you do that then you will surely find some good options in the market. Since there are many good options in the market, things will be much easier. But you need to find the right options to make things easier. Once you do that then it will be very simple. Add Color and make it look good While Stucco comes with its own gray color, which in some cases would also need to be painted on, Stucco Edmonton can add color to the stucco for finishing, which can make the color paint even last longer. This way you don’t need to paint anymore. This is even more long-lasting than a regular painting on a wall. However, if you still choose to do a painting even after sometime when you have applied stucco, you can still do so. This is to make the product very simple and make it easy to use, you can find it very easily without any problems by doing some research on the internet. It is never easy to get edmonton residential stucco services without research and the one who finds out some good options can really make the process much better and easier and you will never have a problem. Use Synthetic Stucco There are various synthetic stucco other than the traditional stucco that Snap stucco: exterior stucco Edmonton contractor & repair can use for your home. EISF is one of them. It is a version of stucco that even provides more versatility for the application. Have the option of selecting different custom styles with Edmonton contractors. There are lots of places from where you can get this and it always helps you to get things done in a good way if you hire a service which is really good and gives you value for money. You cannot ask for anything more. This is something that is made up well and that will help a great deal. It can also be used as an artistic material for work. This can really shape up your home in the right way and give you good results. Finding a service which is really good can go a long way and give good results and you cannot ask for anything more. Unique texture Get an even unique texture on your home wall and structure. Get your wall to come out looking different when you choose a unique stucco texture; form roughly to swirly. Adding color to this even makes it look much more artistic. This is something very important and you need to keep this in mind. With snap stucco: Exterior stucco Edmonton contractor & Repair, you can take your time and talk with professionals to have a finishing that is something very unique and out of this world for your home. Using stucco also allows you to scrap out old wall finishing and immediately increase the value of your home after the work is done. This is a product which is lime based and requires gypsum based stuff. This is very soft and can be molded very easily and one will not have a problem. This will make the wall very durable and attractive and that is something very important. Keep in mind that this is used in modern day contraction and gives good results without fail and you will not have a problem. Also, keep in mind that is something that is used very often and one will not have a problem with anything. People need to prefer and safeguard their interests and that is something very important. Keep on thing in mind that is is also used for decoration and that is something very important and one needs to keep that in mind.
Read More